TriMas Corporation (NASDAQ: TRS), a diversified industrial manufacturer, reported a mixed financial performance in its third-quarter earnings call. The company saw a slight decline in overall sales but reported strong core growth in its Packaging (NYSE:PKG) and Aerospace segments. Adjusted earnings per share (EPS) were affected by a work stoppage, yet the company remains committed to its growth strategy, including the planned acquisition of GMT Aerospace.
Key Takeaways
- TriMas Corporation announced Q3 2024 sales of $229 million, a 2.5% decrease from the previous year.
- The Packaging and Aerospace segments experienced strong core sales growth, up 12.3% and 4.8%, respectively.
- Adjusted EBITDA stood at $44.2 million, with adjusted EPS impacted by a work stoppage in Aerospace.
- The company plans to acquire GMT Aerospace, aiming to strengthen its European presence.
- TriMas maintains its 2024 sales growth guidance at 9%-10% and adjusted EBITDA margin at 21%-23%.
- The company returned over 2% of capital to shareholders in Q3 through buybacks and dividends.
Company Outlook
- TriMas expects continued improvement in its Aerospace and Packaging segments.
- Adjusted EPS guidance for the year remains at $1.70 to $1.90.
- The company anticipates margin enhancements in 2025, addressing capacity constraints and operational efficiencies.
Bearish Highlights
- Specialty Products demand declined, leading to lower sales in that segment.
- A 10-week work stoppage at a key aerospace facility negatively impacted sales and EPS.
- Operating profit showed a decline from the previous year, primarily due to increased costs and IT expenses.
Bullish Highlights
- Organic sales growth in the Packaging segment saw gains exceeding 20% in beauty and personal care.
- TriMas Aerospace achieved a 5% organic sales increase despite the work stoppage.
- The company is actively pursuing strategic acquisitions to bolster growth, particularly in Packaging.
Misses
- The company’s sales decline of 2.5% from the previous year fell short of maintaining previous levels.
- The work stoppage in Aerospace led to an estimated $7-$8 million loss in sales.
Q&A Highlights
- CEO Thomas Amato discussed improvements in Packaging margins from Q3 to Q4, attributing them to new capacity additions and reduced inefficiencies.
- The quoting activity for Packaging and life sciences remains robust, supporting growth into 2025.
- Management emphasized routine portfolio evaluations to ensure long-term shareholder value.
TriMas Corporation (NASDAQ: TRS) reported a slight decrease in sales for Q3 2024, citing a 2.5% decline to $229 million due to lower demand in Specialty Products. However, the company experienced robust core sales growth in other areas, with TriMas Packaging and TriMas Aerospace segments growing by 12.3% and 4.8%, respectively. The company’s adjusted EBITDA was reported at $44.2 million, representing 19.2% of sales, with an adjusted EPS of $0.43. This was notably impacted by a 10-week work stoppage at a key aerospace facility, which cost the company an estimated $7-$8 million in sales and reduced EPS by approximately $0.04.
Looking ahead, TriMas is focused on enhancing production capabilities, particularly in the Packaging segment, and is actively pursuing strategic acquisitions to strengthen its aerospace platform. The planned acquisition of GMT Aerospace is expected to close in Q1 2025 and is projected to expand TriMas’s European presence and generate additional revenue.
Despite the setbacks, TriMas maintains a positive outlook for 2024, with sales growth guidance of 9%-10% and an adjusted EBITDA margin of 21%-23%. The company has demonstrated its commitment to shareholder returns, having acquired approximately 99,000 shares in Q3 through buybacks and dividends.
TriMas Aerospace reported $71 million in net sales, a 5% organic increase, despite the work stoppage reducing sales. The segment maintains a full-year 2024 sales growth guidance of 18% to 22% with adjusted EBITDA margins of 18% to 19%. The Specialty Products segment, however, reported a significant decline in net sales and is projected to see a 2024 sales decline of 25% to 30%.
The company expects continuous improvement in its Aerospace and Packaging segments and maintains an adjusted EPS guidance of $1.70 to $1.90 for the year. CEO Thomas Amato highlighted expected improvements in Packaging margins and robust quoting activity, particularly in the beauty sector, which should support growth moving into 2025.
In summary, while TriMas Corporation faces challenges in its Specialty Products segment and has incurred losses due to a work stoppage in Aerospace, the company’s strategic initiatives and focus on growth in Packaging and Aerospace suggest a proactive approach to overcoming these hurdles and achieving long-term profitability.
InvestingPro Insights
TriMas Corporation’s (NASDAQ: TRS) financial health and market position offer additional context to its recent earnings report. According to InvestingPro data, the company boasts a market capitalization of $1.01 billion, reflecting its significant presence in the diversified industrial manufacturing sector.
The company’s P/E ratio of 25.72 (21.77 adjusted for the last twelve months) suggests that investors are willing to pay a premium for TriMas’s earnings, possibly due to growth expectations in its Packaging and Aerospace segments. This aligns with the company’s reported core sales growth in these areas.
InvestingPro Tips highlight that TriMas has been profitable over the last twelve months, with analysts predicting continued profitability this year. This forecast supports management’s positive outlook and maintained guidance for 2024. Additionally, the company’s liquid assets exceeding short-term obligations indicate a strong financial position, which could be beneficial as TriMas pursues strategic acquisitions like GMT Aerospace.
Another InvestingPro Tip notes that management has been aggressively buying back shares, which is consistent with the company’s reported share repurchases in Q3. This strategy, combined with dividend payments, underscores TriMas’s commitment to returning capital to shareholders, as mentioned in the earnings report.
The revenue growth of 4.83% over the last twelve months, as reported by InvestingPro, provides context to the company’s performance beyond the recent quarter’s slight decline. This longer-term growth trend supports TriMas’s overall strategic direction and its focus on expanding high-performing segments.
For investors seeking a more comprehensive analysis, InvestingPro offers 15 additional tips for TriMas, providing a deeper understanding of the company’s financial health and market position.
Full transcript – TriMas Corporation (TRS) Q3 2024:
Operator: Greetings, and welcome to the TriMas Third Quarter 2024 Earnings Conference Call. At this time, all participants are in a listen-only mode. A brief question-and-answer session will follow the formal presentation. [Operator Instructions] As a reminder, this conference is being recorded. It is now my pleasure to introduce your host, Sherry Lauderback, Vice President of Investor Relations. Thank you. You may begin.
Sherry Lauderback: Thank you, and welcome to TriMas Corporation’s third quarter 2024 earnings call. Participating on the call today are Thomas Amato, TriMas’ President and CEO; and Scott Mell, our Chief Financial Officer. We will provide our prepared remarks on our third quarter results and outlook, and then we will open up the call for questions. In order to assist with the review of our results, we have included today’s press release and presentation on our company website at trimas.com, under the Investors section. In addition, a replay of this call will be available later today by calling 877-660-6853 with a meeting ID of 13749560. Before we get started, I would like to remind everyone that our comments today may contain forward-looking statements that are inherently subject to a number of risks and uncertainties. Please refer to our Form 10-K and our Form 10-Q to be filed later today for a list of factors that could cause our results to differ from those anticipated in any forward-looking statements. Also, we undertake no obligation to publicly update or revise any forward-looking statements except as required by law. We would also direct your attention to our website where considerably more information may be found. In addition, we would like to refer you to the appendix in our press release or our presentation for the reconciliations between GAAP and non-GAAP financial measures used during this call. Today, the discussion on the call regarding our financial results will be on an adjusted basis, excluding the impact of special items. With that, I will turn the call over to Tom Amato, TriMas’ President and CEO. Tom?
Thomas Amato: Thank you, Sherry. Good morning, and welcome to TriMas Corporation’s quarterly earnings call. Let’s turn to slide three. To begin, I am pleased to report that over the past quarter, we continue to experience positive trends in market momentum across many of our key end markets, particularly as compared to the same period last year. Our investments in operational efficiency, customer engagement and innovation have laid a strong foundation enabling us to capitalize on growth opportunities going forward. In our two largest segments, TriMas Packaging and TriMas Aerospace, which together comprise over 85% of our year-to-date sales, we delivered core sales growth of 12.3% and 4.8%, respectively as compared to the prior year quarter. Within TriMas Packaging, our largest group, our core sales gain marks the third consecutive quarter of solid sales growth as we believe we have clearly exited the demand trough experienced in 2023. In fact, organic sales growth in our beauty, personal care and home care product lines were up over 20% as compared to the prior year quarter. While we continue to make operating leverage gains on a sequential basis with TriMas Packaging’s adjusted EBITDA rate just over 21% and higher than the Q2 2024 rate by 100 basis points, we also continue to manage through specific areas of capacity constraints given high demand related to certain product lines. With that said, we have been taking proactive steps throughout the year, including adding incremental production capacity, which will pave the way for improved conversion rates as we enter 2025 and importantly, better position TriMas Packaging to reach its full potential as we move forward. Within TriMas Aerospace, our momentum in sales growth over the past five quarters has been hindered only by the availability of skilled labor, raw materials and certain equipment capacity as we continue to enjoy the strong demand recovery within the aerospace end market. I would also like to note that in the quarter, one of our largest locations experienced a 10-week work stoppage as we navigated through the process of achieving a new three-year collective bargaining agreement which was ratified by the workforce on October 11. We have estimated that absent this work stoppage, we would have delivered another $7 million to $8 million of sales in the third quarter along with a favorable conversion impact on EPS which we estimate to be approximately $0.04 per share. Despite this impact in the quarter, we continue to enjoy positive momentums in bookings and favorable performance trends as we brought our production operations into better synchronization with aerospace and defense end market demand. Finally, within our Specialty Product set of businesses, which are experiencing significantly lower demand in 2024 as compared to last year, we have improved conversion rates over Q2 2024 as a result of the restructuring actions we took last quarter. The third quarter does represent the last fiscal comparison quarter versus the prior year as it has now been one full year since entering the cyclical demand trough for the two businesses reported in this segment. Let’s now shift to an update on our treasury and portfolio actions where we also continue to gain momentum. With respect to share buybacks, we acquired approximately 99,000 shares in the quarter, bringing our total buyback for the year to more than three quarter of a million shares. As I have stated before with respect to our capital allocation philosophy, given our strong balance sheet and cash flow profile, we remain committed to returning capital to our shareholders through both dividends and share buybacks. Inclusive of dividends on a year-to-date basis, we have already returned just over 2%. Regarding our strategy to focus our portfolio of businesses, we have been making progress on the previously announced divestiture of Arrow Engine. Our decision to divest Arrow Engine allows TriMas to invest our resources into product areas and end markets where we believe we have higher growth potential given our scale, and in turn, better serve our customers, drive innovation and enhance value for our shareholders. We remain optimistic to be in a position to update investors further on the status of Arrow Engine in the first quarter of 2025. On the acquisition front, we also remain committed to building out our aerospace platform through strategic bolt-on acquisitions which we believe will add to the long-term value of our aerospace business. As such, today we entered into a purchase agreement to acquire GMT Aerospace, a Germany-based manufacturer of tie rods used in a range of structural aerospace applications. Annualized sales are approximately €20 million with Airbus representing nearly 50% of its revenue. Importantly, this acquisition would represent adding to TriMas Aerospace, our first manufacturing location in Europe, a critical strategic step to leverage and grow our full product range of fasteners and other engineered products within the aerospace market, within the Euro aerospace market. While the purchase agreement contains some important conditions to close, which I will not cover on this call, we would anticipate completing this transaction within the first quarter of 2025. In addition, we continue to make progress on identifying and assessing strategic M&A opportunities for bolt-on acquisitions for our Packaging group. These are just a few actions highlighting our commitment to focus TriMas’ portfolio through corporate development initiatives. Turning to slide four. We wanted to highlight more specific data on our sequential performance improvement when comparing Q3 2024 to Q2 2024 normalized for some of the events I mentioned earlier. I won’t go through these specific points again as I have already touched upon them on this call, however, we provided this summary analysis to illustrate the positive momentum in our performance which we believe is valuable for our investors to see as part of today’s presentation. So, let’s turn to slide five and I will briefly go through our consolidated results for the quarter. For the third quarter, we are reporting sales of $229 million down 2.5% as compared to the prior year quarter as the combined growth in our Packaging and Aerospace groups of 9.2% was more than offset by lower demand than in the same quarter last year in Specialty Products. Segment EBITDA for our portfolio of businesses was $44.2 million or 19.2% of sales, representing a slight decrease in our two largest segments from the prior year quarter, but a more significant decline related to the lower conversion on the sales decrease within Specialty Products. We continue to believe we have upside potential in our segment EBITDA given actions we have taken and with demand rate improvements, particularly as we enter 2025. Consolidated operating profit for the quarter was $22.7 million lower than the prior year quarter also due to the demand challenges within Specialty Products. Adjusted EPS was $0.43, which was slightly lower than we anticipated given the work stoppage within one of our aerospace locations and to a lesser extent other factors as noted. Before turning the call over to Scott, I wanted to take a minute to highlight the quality of our adjusted EBITDA mix which is shown in the bottom section of this slide. As you can see, when we review the adjusted LTM EBITDA mix of our portfolio for this quarter as compared to the prior year quarter, the absolute gains in both our Packaging and Aerospace businesses are shown in these two pie charts. We believe this is important to highlight as these two platforms on a comparable basis include some of the highest value businesses within our portfolio. So, as we move forward and into 2025, it is our objective to continue to build upon this momentum within our TriMas Packaging and TriMas Aerospace groups and invest further in turning around the performance of our Specialty Products businesses. At this point, I will turn the call over to Scott who will take us through our balance sheet, capital structure and segment results. Scott?
Scott Mell: Thanks, Tom. Let’s turn to slide six and I will begin with an update on our key credit statistics. As we have noted on prior calls, our balance sheet remains strong with our low interest-bearing senior notes not maturing until 2029. We generated $15.4 million of free cash flow this quarter, a 35% improvement when compared to Q2 of this year, but lower than the same period last year on account of the lower base of absolute EBITDA. We finished the quarter with a net leverage ratio of 2.7 times slightly higher than the second quarter of 2024. Moving now to slide seven. I will begin my review of our segment results starting with TriMas Packaging. Net sales in the quarter were $130 million as compared to $117 million for the prior year quarter, an increase of approximately 12%. This year-over-year improvement was primarily driven by robust organic growth within our key end markets, with both the beauty and personal care and industrial end markets increasing more than 20%. In addition, we experienced positive year-over-year growth for the first time in 2024 within our food & beverage end market which grew 2.8% year-over-year during the quarter. We remain very pleased to see the ongoing demand recoveries within these important end markets. Operating profit for the quarter was $19 million or 14.6% of sales, a 60 basis point sequential improvement when compared to Q2 of 2024, but down 210 basis points versus the prior year period. This year-over-year decline, again, is primarily related to specific operating costs associated with increased demand for certain dispensing products, which we believe negatively impacted operating margins by 100 basis points in the quarter and IT costs of $1.2 million or 90 basis points, which were allocated from corporate in 2024, but were not in the segment level cost structure in 2023. Normalizing for the impact of these items, pro forma Q3 adjusted operating profit would have been flat when compared to the prior year period at approximately 16.7%. Adjusted EBITDA was $27.6 million or 21.2% of net sales with nominal sequential improvement of $1 million and 100 basis points of margin improvement. We remain very pleased with the sales momentum within TriMas Packaging with year-to-date organic sales up more than 10% and expect our conversion rates to improve as we move into 2025 as we work through operational pinch points created by significantly higher customer orders and related capacity constraints. While we are maintaining our full year guidance for 2024 of 9% to 10% sales growth and adjusted EBITDA margin of 21% to 23%, we do believe there are additional margin enhancement opportunities as we get into 2025. While we expect GDP-plus type sales growth in 2025, we also believe the business is now well-positioned to further improve conversion rates as we continue to bring capacity into better alignment with demand for some of our key dispensing products and we benefit from incremental variable contribution margin from higher sales. Turning to slide eight. I will now provide an update on our TriMas Aerospace segment. Net sales in the quarter were $71 million as compared to $68 million for the prior year quarter, an organic increase of approximately 5%. As Tom mentioned earlier, sales during the quarter were negatively impacted by a work stoppage at one of our largest aerospace facilities. We believe this event reduced sales in the quarter by $7 million to $8 million, and when adjusting for this item, sales otherwise would have increased by more than 15% year-over-year as we continue to work through a historical backlog and general aerospace volumes continue their post-COVID recovery. I would also like to note that while we did experience some shifting of orders by certain customers related to the widely reported work stoppage at Boeing (NYSE:BA), it did not meaningfully impact our results in the quarter. Operating profit for the quarter was $8.7 million or 12.3% of net sales, a slight nominal improvement when compared to the previous year period, even when considering the impact of the work stoppage. As Tom mentioned, we believe the work stoppage reduced adjusted EPS by approximately $0.04 or $2.5 million of operating profit during the quarter. Adjusted EBITDA for the quarter was $13.1 million, or 18.5% of net sales. LTM sales for TriMas Aerospace as of the third quarter remained more than 20% higher when compared to the same period in 2023, and while we are very pleased with this full demand recovery, we do believe there is incremental margin opportunity within TriMas Aerospace as we continue to invest in manufacturing capacity and see further improvements in supply chain and labor force continuity. Despite some of the challenges noted in the third quarter and assuming no meaningful impact from the Boeing matter, we are maintaining our full year guidance for 2024 of 18% to 22% sales growth and adjusted EBITDA margin of 18% to 19%. We also believe there is more than 100 basis points of additional upside and conversion improvement to be achieved in 2025 from the operational improvement efforts previously mentioned and other actions implemented by our Aerospace team along with continued core sales growth given end market demand. In fact, some of our operations are already booked deep into the second half of 2025. Now on slide nine, let’s review our Specialty Product segment. Net sales were $28 million as compared to $51 million for the prior year quarter and $31 million for Q2 of 2024. This will be the last quarter that Specialty Products will be comping against an abnormally elevated period of customer demand driven by global supply chain continuity concerns in 2023. Sales in the quarter continued to be negatively impacted largely by the overstock position of industrial cylinders and to a lesser extent lower sales of compressors serving the oil and gas industry. In addition, sales of cylinders into defense-related applications have been delayed and are now not expected to run at a normalized rate until the start of 2025. While we continue to see some moderate improvement in quoting activity in bookings for steel cylinders, we do not expect these activities to meaningfully impact 2024 and accordingly we are maintaining our full year guidance for 2024 of a 25% to 30% sales decline and adjusted EBITDA margin of 10% to 14%. Operating profit in the quarter was $2.4 million or 8.5% of net sales, A 660 basis point sequential improvement as we are starting to benefit from the broad cost reduction actions taken during Q2 of this year. Adjusted EBITDA for the quarter was $3.4 million or 12.1% of net sales. As we look toward 2025 for Specialty Products, we believe that the cost restructuring actions taken during 2024 along with the strategic initiative at Norris Cylinder to move to a pull inventory system, has the business well-positioned to continue to improve conversion rates within a more moderated demand environment and will allow us to react quickly and efficiently if demand recoveries are at a higher rate than anticipated in 2025. Accordingly, we are expecting more moderate organic growth for 2025 as we come off the very low sales base in 2024 with EBITDA margins reverting back into the low to mid double-digit range. At this point, I would like to turn the call back over to Tom to provide some closing remarks. Tom?
Thomas Amato: Thank you, Scott. Let’s turn to slide 10. Given our expectations for continuous improvement within our Aerospace group now that the work stoppage is resolved and our backlog remains strong, Specialty Products as we continue to see gains from our restructuring actions progress and continuous sequential momentum within our Packaging group, we are maintaining our adjusted EPS range that we provided in July which was a range of $1.70 to $1.90. However, I would like to qualify that while we have only seen modest impacts to date from the widely reported Boeing work stoppage, if it is prolonged like most companies with the narrow space ecosystem, it will impact demand and the supply chain overall. We remain in close dialogue with all of our customers and suppliers related to this matter, and we’ll adjust our production planning if necessary. At this point, however, we have no practical way to estimate any impact and we continue to deliver to our open orders for all of our aerospace customers. Before moving to Q&A, I will conclude our prepared remarks by refreshing the near and long-term value creating opportunities set for TriMas. First, our two largest operating groups, TriMas Packaging and TriMas Aerospace, are at different stages of performance recovery after a very challenged 2023. We anticipate that the positive momentum on these high-quality business lines will carry into 2025 and well beyond. Next, we continue to take proactive steps to focus our portfolio of businesses. We have already announced a first divestiture step which is underway. We also continue to place a priority on building out our TriMas Packaging platform through M&A with a focus on the life sciences, beauty and food & beverage end markets, and also our TriMas Aerospace platform through product complements and adjacencies to enhance its long-term value. Finally, while our Specialty Products businesses have experienced significant challenges this year, we have already completed many actions that are only beginning to provide a financial benefit, but which we expect to build upon as we move into 2025. Moreover, as we expect to experience demand reversion when it occurs, we should convert very well in our Specialty Products businesses. I would like to again thank our investors for their continued interest and support, and we’ll now turn the call back to Sherry. Sherry?
Sherry Lauderback: Thanks, Tom. At this point, we would like to open up the call to questions from our analysts.
Operator: Thank you. We will now be conducting a question-and-answer session. [Operator Instructions] Our first question comes from Ken Newman with KeyBanc Capital Markets. Please proceed with your question.
Ken Newman: Hey, good morning, guys.
Thomas Amato: Hi, Ken.
Ken Newman: Hey, there Tom. Maybe for my first question, just starting with Aerospace. Look, I know that it’s a challenging environment out there with Boeing, but I’m curious if you maybe remind us how much of your workforce is unionized in that segment and whether or not you see any risk of another labor dispute here in the near term?
Thomas Amato: Well, we only have one facility that is unionized and that was a facility that we completed a new three-year deal on. So, we don’t anticipate any more workforce issues within Aerospace.
Ken Newman: Got it. That’s helpful. Just sticking with Arrow then. I was surprised to hear that you haven’t really seen an impact from the Boeing strike this quarter. It wasn’t as incremental as maybe we would have thought. Do you have a sense — and I know visibility in the channel is always really tough, especially on the fastener side, but just how much inventory is maybe out in the channel that these guys are maybe burning through or not burning through? And how does that impacting order rates at a go-forward level?
Thomas Amato: Yeah. Look, that’s a good question. That’s a difficult one for us to predict, but you’re exactly right. Within our largest product lines, we tend to track with a little bit of a lag factor. So, we’re hopeful that a resolution will occur hopefully today and that production will get turned on again. So, it’s difficult for us to predict if there is — will be any impact. I don’t expect it much, if any in Q4, could be a little bit of some rebalancing in 2025. But remember that for much of this year we’ve been behind on shipments. So, we have a lot of open orders that we still have to fill. So, I’m not — I don’t feel like for some of our product lines, some of our major product lines, that there’s a heavy amount of overstocking. But we’ll update you next quarter.
Ken Newman: Got it. Maybe if I could just squeeze one more in. Looking at the Packaging guide that was maintained, it implies a pretty big step up in margins from 3Q to 4Q at the midpoint. I’m just curious if there’s a way to help us understand how much of that’s going to be driven by the better absorption on the new capacity additions or if there’s a mix benefit there. Anything that we should kind of be aware of. And how is that maybe trending through October relative to that midpoint of the guide?
Thomas Amato: Well, first of all, we have been seeing some sequential improvement within Packaging throughout the year. We expect that to continue within all of our operations, outside of very few select hotspots, TriMas Packaging is performing pretty well. So, assuming orders hold up, we do have some short cycle nature to our business in this current environment. But assuming the orders hold up as we expect them to, I expect that we’ll continue to make progress against some of the hotspots we have in the quarter and perform better than Q3.
Ken Newman: So just to clarify, this sounds like this is truly all just an absorption and the capacity additions. Is that fair?
Thomas Amato: Yeah. Well, look, we — as Scott alluded to and I mentioned as well, we do have a few hotspots where we have some operations that are not performing to their full potential. And every day we get better and we reduce some of the inefficiencies that we’re seeing. And so, I wouldn’t quite call that absorption. I just call that some eliminating some of the off standard costs that are impacting us. And the true irony is that the driver behind those off standard costs are exceptionally high demand on a select few product lines, which — in 2023, orders were down for those product lines nearly 20%. So, it’s sort of a snapback effect and we’ve seen this in Aerospace and we’ve seen this in other businesses as well. Sometimes when demand snaps back, that’s great at the top line, but it takes a while to bring things into balance.
Ken Newman: Yep, that’s helpful. I’ll get back in queue. Thanks.
Thomas Amato: Thank you.
Operator: Our next question comes from Hamed Khorsand with BWS Financial. Please proceed with your question.
Hamed Khorsand: Hi, good morning. So, first off, on Packaging, I guess, you were seeing some orders come in and some inefficiencies. Why is it taking so long to right size the business and get the bottlenecks out of the way?
Thomas Amato: Hi. Good morning, Hamed. That’s a good question. In a particular case that we’re referencing, it specifically has to do with installed capacity. So, we sometimes when we have to add capacity can take 40-plus weeks. By the time equipment comes in, it gets qualified and approved by the customer and brought online. So, we actually ordered equipment late last year, earlier this year, and it’s on our factory floors in fourth quarter. So, we’re in the process of ramping it up. So that’s the issue. As we’ve been talking about capacity pinch points, what that really means is we had to add another assembly line.
Hamed Khorsand: Got it. And then, on Packaging itself, could you just describe the order quoting activity you’re seeing? And given the guidance, it seems that Q4 could actually be flat to up, while seasonally Q4 is supposed to be weak for the segment.
Thomas Amato: Yeah. First let me say that we do have a fair amount of product lines that are shorter cycle in nature and customers are taking advantage of that short cycle dynamic. So, the visibility to exact orders are a little bit more difficult than they have historically been. But we’re starting to see the trends with those orders coming in. But I will — you said something earlier in your question about the quoting activity. The quoting activity that we’re seeing in our Packaging group is exceptional right now. And I would expand that also to our life sciences product lines. And we’re not — we’re pretty unique, because we have the ability to offer customers in life sciences the prototype runs and then sort of going up to mid scales before they might go to a larger CDMO supplier. But we’re seeing a lot of quoting activity globally for particularly the beauty area, which is an area where we have several product lines and in life sciences at the moment. So, we’re pretty optimistic about our activity that we’re seeing today translating into core growth as we move into 2025 and beyond.
Hamed Khorsand: Okay. And then could you comment about this GMT acquisition, what the price point is on this?
Thomas Amato: Yeah. I can’t at this time, because we just signed the agreement and it’s subject to a number of conditions before we close. But assuming everything is cleared appropriately, then we will provide that later or early into next year. But as I mentioned, it’s 20 million in euro in revenue, so you can sort of handicap from that point in terms of overall size relative to TriMas.
Hamed Khorsand: And given the decision to divest your engine business, is there any decision or opinion as to what you want to do with the rest of the business, or it’s just basically whatever interest you receive inbound?
Thomas Amato: I’m not quite sure I follow the question.
Hamed Khorsand: Well, you’ve decided to divest engines. Is there any interest to divest anything else, or are you depending on what any inbound call you get? You’re not really …
Thomas Amato: Yeah. I think it’s a good question. We’re always looking at our portfolio of businesses. We do have some businesses that are quite different from others in terms of the broad set of characteristics. So, Hamed, it’s a good question. We’re always looking at the businesses we own and assessing what businesses have the longest term strategic potential for us in terms of creating value for our shareholders.
Hamed Khorsand: All right. Thank you.
Thomas Amato: Thank you.
Operator: Our next question comes from Ken Newman with KeyBanc Capital Markets. Please proceed with your question.
Ken Newman: Hey, thanks for taking the follow up. Maybe just to touch on that last question, in terms of how you view the portfolio. Obviously, you’ve got a new shareholder here and I’m curious if there’s been any talk at the Board, or just how you view his intention, whether he’s got a view on the Ford (NYSE:F) portfolio or that you could talk to.
Thomas Amato: Well, yep, we’ve certainly read the public filing, I think as a normal course, irrespective of that particular shareholder or other large shareholders that we have as a company, and certainly with our Board, we’re always reviewing each of our portfolio — our set of portfolio businesses and assessing which have the best long-term value for us and for our shareholders. So, I don’t think anything has really changed. It’s something that we do as a normal course as a Board, all the time.
Ken Newman: Got it. Okay. And then maybe one more on free cash and capital deployment. Obviously, you’re maintaining the view on maybe going after M&A as well as being a little bit more active on share repurchases here through the year. Maybe first on the M&A pipeline. Obviously, you’ve got the GMT acquisition here. How do you characterize the pipeline of deals here relative to both the Aerospace and the Packaging segments. And I guess, as a follow up to that, the GMT deal, is that one that should we expect that to be margin accretive or relatively in line with segment margins when that closes?
Scott Mell: Yeah. This is Scott, let me try to address the GMT deal. We’re not going to get into specifics there, but obviously, we do expect it to be accretive as it relates to EPS, adjusted EPS coming out of the gate. With regards to your other question on the pipeline and how it relates to cash flow, could you just ask that one more time, so I make sure I’m clear on what you’re asking?
Ken Newman: Yeah, yeah. I’m just curious if you have — just give some color on what the pipeline is looking like between Packaging and Aerospace deals, because the leverage is up a little bit. But mostly I think just on maybe some more depressed EBITDA in the cycle and just where are deals kind of trading at from a multiples perspective and just your opportunity to go after incremental bolt-ons from here?
Thomas Amato: Yeah. Let me jump in here, Ken. Certainly, we’re very active on the Packaging front and we’re looking at deals that are what I would call nicely in the bolt-on size range. So, for us those are great deals to absorb and integrate. Assuming we make progress with Arrow Engine, which we expect that will help us sort of fund some of the repositioning of our portfolio as we move into next year, focusing further into Packaging and deemphasizing Specialty Products. So yeah, so I think — I don’t know if that addressed it, but we’re seeing high activity still in our Packaging set of businesses and I would say a little bit more select set of opportunities within Aerospace. This acquisition that we identified and developed and sort of brought into — brought under contract is a uniquely great fit with us and it provides us the long-needed presence in Europe and to increase our concentration with Airbus. So, we felt it was a huge add for our business, albeit it’s a smaller acquisition.
Ken Newman: Very helpful. Thank you.
Thomas Amato: Did that address your question?
Ken Newman: Yeah, that was very helpful. It did. Thanks.
Thomas Amato: Thank you.
Operator: We have reached the end of our question-and-answer session. I would now like to turn the floor back over to Thomas Amato for closing comments.
End of Q&A:
Thomas Amato: Thank you. And thank you for joining us on our earnings call, and we look forward to updating you again next quarter. Have a great day.
Operator: This concludes today’s teleconference. You may disconnect your lines at this time. Thank you for your participation.
This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.